John Deere 3025E John Deere MAGNUM Smart-Tune-X Performance Fuel Tuner Chip (2024)

Description

are worth the money searching for If you are in the market for a reliable Remap Tune that will Pull Up your John Deere 3025E John Deere’s motor properly without unwanted aftereffect of any sort, our unbelievable Smart-Tune Engine Management Chip is indisputably the Fuel Remap Chip that will be the most outstanding product for your dollars. After the fully effortless DIY installation you might certainly benefit from the power gain, enhanced torque and acceleration. John Deere 3025E John Deere ECU Chip will dupe the signal of your motor’s sensors controlled by the Electronic Engine Management, attaining a performance-oriented adjustment to the EFI settings, to maximize the torque, Output, kick-out time and engine responsiveness; throughout the engine RPM range. FOR CORRECT FITMENT PLEASE ACKNOWLEDGE IT IS IMPORTANT TO VIEW THE HIGH NOTES AND TIPS PDF ABOUT YOUR John Deere 3025E John Deere ECM chip.

Ameliorate your vehicle’s HP Potential and wave adios to the sluggard stock fuel trim settings. Our company’s Engine Computer Tune will reprogram the Powertrain Control Module’s fuel injection programming to unrestrict your John Deere 3025E John Deere’s full Horsepower.

With this programmable Fuel Tune Pack in a short time you’ll receive 18% extra raw Power Output better acceleration and torque throughout the RPM range. This impeccable Magnum Fuel Tune will expeditiously and effortlessly override the lean factory fuel injection settings to remove the strangleholds implemented by your John Deere 3025E John Deere’s manufacturer due to stringent requisites they have to comply with.

This Fuel Management Chip wires inline with the hot return wire of the Intake Air Temp sensor, also named IAT or MAT that sits on intake as a standalone two-wire sensor or the part of the integrated 4 to 6-wire Mass Flow Sensor; also called (MAF, TMAP, etc.) unit. The Race Chip also connects into the AF Sensor’s signal wire to hoax the barriers employed by the Electronic Control Unit and that would prevent the fuel trim remap from going through while because of Automatic Temperature Compensation (ATC) implemented by this Fuel Tune Pack, you can be assured, your vehicle will outrun any other John Deere 3025E John Deere, be it factory or altered.

Magnum’s Fuels are designed to override the PCM thinking Inlet Air Temp is much lower, then it will allow more fuel for a richer mixture, moreover on Heavy Duty or Recreational cars where exhaust emissions is monitored by emissions-control system, through the Exhaust Oxygen Sensor, Our Impeccable Magnum Tuning Mod disables the strangleholds implemented by the PCM to unrestrict your John Deere 3025E John Deere‘s unleashed Power.

If you have the capability to execute certain electrical connections you have the option to surely wire in this impressive Smart-Tune Engine Computer Tune, surprisingly swiftly. unleash every bit of Engine Performance in your power plant with this High Grade Magnum ECU Piggyback.

Is your John Deere 3025E John Deere craving for instant HP-gain? Give the all clear and take the advantage of the huge - HP ramp-up on your car.

Were you told? The Manifold Absolute Temp plays major role in the computing of fuel injection timing. Most of the competitors’ Engine Computer Chips use the OEM Intake Air Temp sensor’s signal which is being spoofed whereas Smart-Tune Fuel Remap Chip boasts a standalone sensor add-on Intake Air Temperature sensor which makes the product able to set the entirely correct and optimum fuel injection programming.

Specs

Claims

• 17% extra Horsepower and Torque
• 22% faster acceleration throughout the RPM range
• 6% fuel mileage improvement
• Higher top end speed (until redline limit)
• Improved throttle response w/o flat spots

Features

• Hassle-free installation
• Dual-mode emission control feedback system
• You can go back to factory settings
• 10-year warranty
• Full adjustability w/ high-resolution LCD display
• Remap correction w/Auto Temperature Compensation
• In-built oxygen sensor control (for emission controlled models only)
• Waterproof design (not submersible)

Taps into

• Intake Air Temp and Oxygen Sensor (if any)
• Ignition key activated +/- 12V power feed

Required skill

• Minimum electrical and mechanical skill

Dimensions

• (L x W x H) w/o knob: 5 3/4" 146 mm x 2 7/8" 73 mm x 1 1/2" – 38.1 mm
• Weight: 0.77lbs - 0.35 kg
• Harness length: 5' - 1.5m

Packing List

• 1 x Smart-Tune-X Controller
• 6 x Bullet Connector
• 2 x Scotch Lock
• 2 x Zip Tie
• 6 x Heat Shrink Tubing
• 1 x Installation Instructions